本帖最后由 chn6 于 2014-1-12 14:59 编辑
要接电脑使用,还买1550瑞郎,真贵。。。
Features
With its compact, elegant design and ease of use, the ChronoCube is the ideal watch performance test device for sales areas, all watch service centres and ambitious watch collectors.
High-precision measurement results
Reliable and accurate measurement results for rate variation, amplitude and beat error thanks to Witschi technology.
Five measuring positions
The ChronoCube can be put into the following measuring positions manually: dial on top, dial underneath, crown on right, crown underneath and crown on left.
The measuring position is detected automatically and displayed.
Automatic beat number detection
Automatic detection of all current beat numbers (frequencies) between 12,000 and 72,000 A/h.
Simple system with no parameterisation necessary
The ChronoCube system consists of a measuring device and software – no parameterisation is necessary.
Choice of user interfaces
You have a choice of two user interfaces - "CLASSIC" and "SPORT».
Three colours
The ChronoCube is available in aluminium, steel and ruby.
Technical data Lift angle: Ajustable from 10° to 90°
Measuring mode: standard mode for mechanical watches
Measuring ranges:
Rate variation:± 999 s/d or ± 99.9 s/d,
resolution: 1 s/d or 0.1 s/d
Amplitude: 80° to 360°, resolution 0.1 °
Beat error: 0 to 9.9 ms, resolution 0.1 ms
Interface: USB 2.0
Power supply: 5VDC, max. 500 mA via USB (no separate mains supply)
Dimensions: 110 x 110 x 115 mm (WxHxD)
|