OHSEAL 发表于 2016-6-12 20:31:27

石英机芯来自哪里？

http://watchlead.com/wbbs//mobcent//app/data/phiz/default/33.png




hkhhj 发表于 2016-6-12 20:34:12

我看到有“瑞士制造”:lol

G 发表于 2016-6-12 21:00:50

中学时戴过挺长时间万国Portofino的石英表http://watchlead.com/wbbs//mobcent//app/data/phiz/default/19.png

smartmind 发表于 2016-6-12 21:56:15

积家的？

OHSEAL 发表于 2016-6-12 21:56:39

G 发表于 2016-6-12 21:00 static/image/common/back.gif
中学时戴过挺长时间万国Portofino的石英表

富家子弟啊http://watchlead.com/wbbs//mobcent//app/data/phiz/default/15.png

OHSEAL 发表于 2016-6-12 22:08:13

smartmind 发表于 2016-6-12 21:56 static/image/common/back.gif
积家的？

http://watchlead.com/wbbs//mobcent//app/data/phiz/default/33.pnghttp://watchlead.com/wbbs//mobcent//app/data/phiz/default/33.png

smartmind 发表于 2016-6-12 22:42:32

OHSEAL 发表于 2016-6-12 22:08


我是猜的，万国以前有飞行员的石英计时，是用积家的Mecaquarz，石英和机械混动的，看这个我猜也是积家?

smartmind 发表于 2016-6-12 22:43:53

IWC cal. 630

Hi Mark,

There are three variations of the JLC quartz chronograph movement used by IWC:

Cal. 630 - quartz-controlled time (hours, minutes, small seconds at 6), chronograph (center seconds, 30-minute counter at 9, 12-hour counter at 3), window date, and moon phase display at 12.

Cal. 631 - cal. 630 without moon phase display.

Cal. 633 - cal. 631 with alarm.

The cal. 630 family uses two separate quartz-controlled stepper motors, one to drive the timekeeping portion (1 Hz, 3600 bph) and one driving the mechanical chronograph module (4 Hz, 14400 bph). Since there are two motors, the chronograph can run when the timekeeping portion is stopped.

Best regards,

Stephen Sugiyama

应该是这款
http://www.mikemargolis.com/icamvt.jpg

smartmind 发表于 2016-6-12 22:43:54

IWC cal. 630

Hi Mark,

There are three variations of the JLC quartz chronograph movement used by IWC:

Cal. 630 - quartz-controlled time (hours, minutes, small seconds at 6), chronograph (center seconds, 30-minute counter at 9, 12-hour counter at 3), window date, and moon phase display at 12.

Cal. 631 - cal. 630 without moon phase display.

Cal. 633 - cal. 631 with alarm.

The cal. 630 family uses two separate quartz-controlled stepper motors, one to drive the timekeeping portion (1 Hz, 3600 bph) and one driving the mechanical chronograph module (4 Hz, 14400 bph). Since there are two motors, the chronograph can run when the timekeeping portion is stopped.

Best regards,

Stephen Sugiyama

应该是这款
http://www.mikemargolis.com/icamvt.jpg

5000 发表于 2016-6-12 23:10:57

G 发表于 2016-6-12 21:00
中学时戴过挺长时间万国Portofino的石英表

你够了{:2_37:}

OHSEAL 发表于 2016-6-13 00:06:36

smartmind 发表于 2016-6-12 22:43 static/image/common/back.gif
IWC cal. 630

Hi Mark,

http://watchlead.com/wbbs//mobcent//app/data/phiz/default/25.pnghttp://watchlead.com/wbbs//mobcent//app/data/phiz/default/25.pnghttp://watchlead.com/wbbs//mobcent//app/data/phiz/default/25.png

smartmind 发表于 2016-6-13 00:07:56

OHSEAL 发表于 2016-6-13 00:06


:$:$:$

邯郸藏友 发表于 2016-6-13 00:08:56

G 发表于 2016-6-12 21:00 static/image/common/back.gif
中学时戴过挺长时间万国Portofino的石英表

我们都用小天才的时候你就用上鸡家啦，http://watchlead.com/wbbs//mobcent//app/data/phiz/default/12.png还留着了没

机械米 发表于 2016-6-13 00:35:57

JLC，机械结构的石英计时表，以前石版普及过

shuijiao 发表于 2016-6-13 00:43:46

为什么这种壳的iwc表圈上的五个洞总是歪歪的？

一支穿云箭 发表于 2016-6-13 09:16:01

学习{:2_35:}
页: [1]
查看完整版本: 石英机芯来自哪里？