2011 Panerai P.3000 自家机芯
<p>Hi All; Today, in Florence, the spiritual home of Panerai; Mr. Bonatti Eric Lein introduced the new P 3000 movement; here is the press release: P.3000 Entirely designed, developed and produced in the Officine Panerai Manufacture in Neuchacirc;tel, the hand- wound P.3000 calibre presents the main characteristics of the Panerai movements both in terms of structure and in terms of performance, robustness, accuracy and its long power reserve. The thickness of the calibre P.3000 is 5.3 mm and the diameter is 161?2 lignes, a substantial size which traces its origins from that of the movements which were fitted to the historic Panerai models. The calibre is immediately recognisable by its construction, which is similar to that of a three-quarter plate movement: a large bridge, next to another smaller one, covers the majority of the mechanical parts and it is fixed to the bottom plate by a series of screws of substantial thickness, thus forming a particularly rigid structure. The movement has 21 jewels and it uses two spring barrels connected in series. Such an arrangement enables long, thin springs to be used, which ensures the delivery of a more even force and also does so over a longer period of time, with a power reserve of 3 days. The balance wheel is unusually large (13.2 mm) and it is the variable inertia type, with four adjusting screws arranged externally round the ring, so that the rate can be regulated without it being necessary to remove the whole assembly. Supported by a bridge with twin supports – a fixing much safer and more stable compared to the cantilevered single bridge – the balance wheel oscillates at a frequency of 3 Hz, equivalent to 21,600 alternations per hour. It is fitted with an Incablocreg; anti-shock device and is free-sprung, so there is no regulating lever. With brush-finished bridges and chamfered angles – that is, with the angles smoothed and polished – the P.3000 calibre is also fitted with the device for the rapid adjustment of the time: a star wheel with 12 points and a small spring clutch enable the hour hand to be moved one hour at a time, without interfering with the movement of the minute hand or the operation of the watch. Functions ? Hours, minutes, small seconds Technical specifications ? Hand-wound ? Power reserve 3 days ? 160 components ? 21 jewels ? 161?2 lignes in diameter ? 5.3 mm thick ? Two spring barrels ? Frequency of oscillation 3 Hz ? Incablocreg; anti-shock</p><p> </p>
<p> </p>
<p> </p>
<p>http://i9.photobucket.com/albums/a82/JWKC/p%203000/0492052a.jpg </p>
<p>http://i9.photobucket.com/albums/a82/JWKC/p%203000/3f2e58ac.jpg</p>
<p> </p>
<p> http://i9.photobucket.com/albums/a82/JWKC/p%203000/4ec5025f.jpg</p>
<p> http://i9.photobucket.com/albums/a82/JWKC/p%203000/b1026ae2.jpg </p>
<p>http://i9.photobucket.com/albums/a82/JWKC/p%203000/ee090f09.jpg </p>
[此贴子已经被作者于2010-10-2 11:09:36编辑过] P总是在追求与众不同，实际显得很做作。 <div class="msgheader">QUOTE:</div><div class="msgborder"><b>以下是引用<i>iwc3706</i>在2010-10-4 11:23:00的发言：</b><br/>P总是在追求与众不同，实际显得很做作。 </div>
<p>打磨方式吗?</p> 真是没啥看头 <p>p的自家，看上去总是很美</p>
<p> </p>
<p>实际还是不敢下手。。。。</p> <p><font face="楷体_GB2312" color="#000080" size="5">大尺寸+大摆轮，很好，很强</font></p> 看上去 不咋样啊 该来的终于来了......... <p> </p>
<p><font face="楷体_GB2312" size="5">过桥摆很正点。</font></p> <div class="msgheader">QUOTE:</div><div class="msgborder"><b>以下是引用<i>mxg212</i>在2010-10-2 17:11:00的发言：</b><br/><imgtitle="dvubb" alt="图片点击可在新窗口打开查看" src="http://www.watchlead.com/bbs/images/emot/em52.gif" align="middle" border="0"/>看上去 不咋样啊 </div>
<p>沛机器不搞装饰打磨,线形打磨不,倒角也闪得很,与它家的文化定位有关吧.</p> <p>动力和尺寸都蛮强大,我喜欢GMT.</p>
<p> </p>
<p>沛近年新机芯面市很快,JOE兄觉得有没有潜在风险?</p> <p>比999顺眼一些，999有点过于矫饰。</p>
<p>沛自家机为什么没有天文台？</p> <p>大直径，72h动力，看着简朴，喜欢。</p> <p><font size="5">很偷懒很讨巧的做法，噱头不错，实际没什么意思</font></p> 夹板好空啊。。。 <div class="msgheader">QUOTE:</div><div class="msgborder"><b>以下是引用<i>Nivarox</i>在2010-10-3 21:38:00的发言：</b><br/>
<p>p的自家，看上去总是很美</p>
<p> </p>
<p>实际还是不敢下手。。。。</p></div>
<p></p>
页:
[1]