看看号称钟里劳斯莱斯的“昂文德帝”的手表

Dear All:
I thought I add a bit the discussion on Habring2 's Jumping Seconds complication. I mentioned that it can be easily added to different movements, and in fact that has been done already:

The famed clock manufacturer Erwin Sattler from Munich decided the celebrate the manufacture's 50th anniversary with a wristwatch that is true to a classical regulator (seconds hand at 12, hour hand at 6 o'clock) and furthermore features a dead-seconds mechanism.

They turned to Maria Kristina and Richard Habring and asked whether they would be able to offer help. Indeed, having just finalised their own in-house jumping seconds mechanism, this was quickly accepted. The result is the Erwin Sattler Regulateur Classica Secunda:




The watch comes in a 44mm case and a pure silver dial.




True to Sattlers pendulum clock Classica Secunda the dial is held with 4 screws. Time is indicated with gorgeous heat-blued hands:




The case is massive with distinct lines. A polished case band is accentuated with matte bezel and case back:




Crown with the Sattler logo:







The movement is based upon an ETA 7750, but the chronograph function had to make way for the jumping seconds complication as well as for the hour hand.







The benefit for the observer is that the jumping seconds mechanism is better visible, i.e. the jumping seconds spring (almost totally hidden in the Habring2 watches) can clearly be identified. Note the spring on the left:




The rotor has been decorated with the company's initials and the logo by Benzinger:




Its a different animal on the wrist than a Habring2 watch, it has a certain 'olde worlde' charm to it (and does not wear very large!):




All of the above said, thanks to the modular character of Habring2 's Jumping Seconds complication Sattle now also can offer a smaller, 38mm version based upon the Habring2 A09MS handwound movement. Its called the Regulateur Classica Secunda Medium.

This is modularity used with a great effect!

Thanks for viewing,
Magnus

德国钟，瑞士表。当然，英国，丹麦，还有几个不错的钟品牌。

盘面上4颗螺丝蛇足了。

这货有点大了，44mm的，要是能弄成38mm就好了

FLEX 发表于 2013-11-5 22:57
这个表盘其实很像它家钟···

因为他们选用的就是德国传统的天文台钟的式样。和德国多少沾边的品牌皆会拿来引用，比如go，比如瑞宝(创始人是德国人)，再比如这款。

这个表盘其实很像它家钟···

机械米 发表于 2013-11-5 22:37
估计买钟会送？

额。。。

东海岸 发表于 2013-11-5 22:27
很有味道，就是看时间要由下往上看有点怪。这跳秒是一秒一跳？

估计买钟会送？

很有味道，就是看时间要由下往上看有点怪。这跳秒是一秒一跳？

看过钟表杂志此表的介绍，还有详细的机芯结构图，貌似对华价格歧视？！

面上几个钉子好像有点不晓得怎么评价。。。

面针真的很漂亮

smartmind 发表于 2013-11-5 16:28
版主能教教咋看等级吗？很像学习一下，是看摆轮的颜色？

Glucydur摆轮形状可以初步辨识，但不适用国产假表。

OHSEAL 发表于 2013-11-5 17:34
昂文做手表了???

早就有了。

昂文做手表了???

urin1010 发表于 2013-11-5 15:34
兄弟对seiko比较深入研究，还望多些这方面的探讨和交流，还望指教。

惭愧惭愧啊~都是在各个地方偷师看来的~

shek329 发表于 2013-11-5 16:09
是改为跳秒了，所以卖得贵。
不过所用的7750的级别不高。

版主能教教咋看等级吗？很像学习一下，是看摆轮的颜色？

smartmind 发表于 2013-11-5 15:13
这不就是7750嘛......,微调都没舍得改...,看说明的意思是改成跳秒了？

是改为跳秒了，所以卖得贵。
不过所用的7750的级别不高。

林芷晨 发表于 2013-11-5 15:25

兄弟对seiko比较深入研究，还望多些这方面的探讨和交流，还望指教。